Brief Introduction to Square Nut
May 05,2022
Square nuts are parts that closely connect mechanical equipment. Nuts and bolts of the same specification can be connected through the inner thread. At present, most nuts are used together with gaskets when locking or set into an integrated structure, which can increase friction and strengthen fastening.
However, Square Thin Nuts are usually used directly without adding gaskets, and the upper and lower end faces are flat and very smooth, When subjected to strong vibration, it is very easy to loosen and the fastening effect is poor.
The square nut block shall be pre-stuffed into the aluminum profile groove during installation, which is used to connect various accessories on the profile. The square nut block shall be pre-stuffed into the aluminum profile groove during installation, which is used to connect various accessories on the profile.
Difference between T-nuts and Square Thin Nuts
When assembling profiles, many accessories will be used for the stability of profiles. Among them, nuts are indispensable. There are various types of nuts. Different nuts have different effects on aluminum profiles. What are the differences between these two types of nuts?
The main difference between Square Thin Nut and T-nut is that one belongs to the front nut series and the other belongs to the rear nut series.
The T-shaped nut belongs to the rear nut series. It can be simply fixed in the aluminum profile groove. It can be positioned and locked automatically in the process of assembly. It is often used together with the flange nut. The advantage of using post nut is that it is easy to modify later. Because the rear nut is fixed in the profile after the completion of the frame structure, it is convenient to modify.
The Square Thin Nut belongs to the front nut. During installation, it needs to be embedded in the aluminum profile groove and matched with the hexagon socket bolt to connect accessories on the aluminum profile. It should be noted that after the front nut is fixed to the frame, it will be troublesome to modify it later, so pay attention to the correctness of the frame structure in the early stage.
Precautions for using Square Thin Nuts
The structural steel of Square Thin Nut, all buildings, power tower pole accessories, oil and natural gas, central grid pole, wind energy, mechanical equipment, automobile. The square nut block shall be pre-stuffed into the aluminum profile groove for installation.
Various accessories are connected to the profile. So what do you know about the precautions when using Square Thin Nuts?
- The size of the wrench opening using the movable wrench shall be consistent with the size of the nut, and a small wrench with a sleeve shall not be used.
- It is forbidden to hammer into the nut during installation to prevent the nut thread from being damaged.
- The friction surface of the treated components shall not be stained with oil, soil, and other sundries during installation.
- During installation, the friction surface of the component shall be kept dry and shall not be operated in the rain.
- The electric wrench is to be tested regularly during use to ensure the accuracy of torque and operate according to the correct tightening sequence.