Micro Turnbuckles FAQ.
June 07,2022
Micro Turnbuckles FAQ
The turnbuckle is mainly made of copper, iron and other materials, and the surface is electroplated. There is a nut at the opening for locking, which is beautiful and safe. The turnbuckle manufactured by Aobi Accessories Products Co., Ltd. has the characteristics of not easy to rust and flexible in use.
How to replace the Micro Turnbuckles drill chuck
There are two methods as follows: 1. There is a matching tool, a conical axial wrench, and the screw on the chuck is aligned with the thread, and then the wrench is rotated, and it is good to replace it with a new one. 2. There is no supporting tool, find a screwdriver or other flat-mouthed tool, and knock it perpendicular to the thread of the chuck to remove it, and the disassembly is complete...
How to use the tools of Micro Turnbuckles and what are they called.
There are many ways to process threads in the factory. Some are threading on a lathe, and some are useful for manual threading. The threading tool used is called die. There are teeth made according to the national standard in the inner hole of the die. When threading, place the die on the thread. Fix the die into the die holder with fastening screws, then the thread of the rotating die holder will be cut and formed on the screw...
Who knows what to do if the furniture Micro Turnbuckles is slippery?
1. If the looseness is small, you can wrap the screws with copper or aluminum (cans) and screw them in. 2. If there is too much looseness, you can cut a wooden dowel to fill it in, and then screw in the screw. 3. If there is space, change the place to screw in the screw.
Will the water on the faucet and the iron tee turnbuckle be soaked in a few days?
No, it is damaged and needs repair. 1. The faucet does not leak from the water outlet: this happens when the shaft gasket in the faucet is worn. Solution: According to the size of the faucet, select the corresponding pliers to unscrew the faucet gland, and use the clip to take out the worn shaft gasket, and then replace it with a new auxiliary...
Anchor bolts and screws
Thread refers to the length of the overhanging thread of the threaded anchor bolt of the bolt = plate thickness + nut thickness + not less than 2 buckles (5--10mm) The overhanging length of the anchor bolt = the adjusted distance + the overhanging wire Buckle length