Chrome Plated Washers,Large Bronze Washers,Galvanized Dock Washers

Chrome Plated Washers is a widely used mechanical component. Generally speaking, it has two functions: on the one hand, it is conducive to improving the fatigue strength of the connection, and on the other hand, it is conducive to the loosening of the connection.

Today, let’s talk about why spring washers are widely applicated.

Causes of the expansion ring of the spring washer opening and hydrogen embrittlement fracture

1. The Spring Large Bronze Washers has an expansion, which is usually not the problem of the spring washer itself.

1. The Spring Flat Washer with an expansion ring is inevitably subjected to radial external tension, which comes from the tightening axial force generated by the tightening torque.

1. The outer slope of the nut-bearing surface produces a radial component force in the axial clamping force, resulting in the expansion of the opening of the spring washer. The smaller the chamfer diameter, the more likely it is to have an expansion ring.

1. Adding a Spring Flat Washer between the nut and the spring washer can help slow or prevent the expansion of the ring, but the flat washer is too thin or too soft to prevent the expansion ring.

1. The hydrogen embrittlement fracture of the spring washer is generally caused by an unreasonable heat treatment process, and the fracture is caused by dehydrogenation treatment after galvanizing.

What are the reasons for the wide application of Spring Flat Washer manufacturers?

The saddle Galvanized Dock Washers has a low manufacturing cost and is widely used in automobiles. The product has a wide range of applications and has been used in many industries. Nowadays, with the development of technology, the performance of products has been greatly improved. At present, many manufacturers produce secondary products. To be safer and safer, you must read the instructions before use.

The saddle spring washer is generally used for soft, hard, and brittle connectors, and a wave spring washer is easy to install. It uses the elastic deformation of the gasket to stretch the thread pair axially, and the tip of the gasket also helps to prevent loosening.

However, the corrugated spring washer loses proper elasticity due to heating or long-term compression during use. Therefore, before installing the wave spring washer, check whether the elasticity fails. The inspection method is to check whether the upper and lower ends of the corrugated spring washer interface are misaligned at a certain angle. If the wrong angle is small or not staggered, the washer will fail. At the same time, the size of the corrugated spring washer shall correspond to the size of the matched bolt, and the outer diameter of the washer shall be slightly smaller than that of the nut.

Tip: saddle spring washer manufacturers can not only rely on price but also refer to many factors, such as manufacturer's qualification, product raw materials, etc. However, this does not mean that it can be easily operated during installation and use, but it should also be operated according to the formal instructions!

Make a purchase of an Chrome Plated Washers,Large Bronze Washers,Galvanized Dock Washers Manufacturer from China, you can get Thread Sealing Washers at a good price if you have a large quantity. We hope to be your long-term partner.