wholesale thread rod,wholesale hanger bolt screw,OEM Hex bolt

What is threaded rod?

Threaded rod, often referred to as a stud, is a rod of varying length that is threaded in a helical structure.

Similar in appearance to a screw, the threading extends around and along the rod to cause rotational movements when in use. Threaded rods combine linear and rotational movement to create strong resistance to pressure.

The direction of the rotation caused by a threaded rod depends on whether the rod has a right-hand thread, left-hand thread, or both.

Designed to withstand very high levels of pressure and tension, threaded rods are a common fixing for support systems and used for a variety of applications.

What is a threaded rod used for?

A threaded rod is a fastener and functions thanks to the threading, which causes a tightening action from the rotational movement. Threading on a rod allows other fixings like bolts and nuts to easily screw or fasten to it.

Threaded rods have many applications, effectively working as a pin to fasten or connect two materials together.

Also used to stabilise structures, they can be inserted into various materials like concrete, wood or metal to either temporarily create a steady base during construction or they can be installed permanently.

How to choose the correct threaded rod？

There are several types of threaded rod available on the market that will suit different purposes, conditions and materials.

The fully threaded rod that Armafix supplies are usually used when effective grip strength is required through the entire length of the rod.

They are often used to align structures or are embedded into materials, like concrete, as the threading provides good resistance.

The material is another essential factor to consider when choosing the best-suited rod for your application.

Threaded rods are used in a variety of sectors and for several purposes such as construction, plumbing, manufacturing, marine, agricultural, oil extraction and contractor work.

How to cut threaded rod？

Sometimes threaded rod will have to be cut to suit your project. It is a common question and not quite as simple as you might think. The rod can be difficult to hold in place and the threading can be affected.

Perhaps the easiest and more efficient way of cutting threaded rod is to use a rod cutter, which will produce a clean, burr-free cut with less effort and less time wasted, plus it is lightweight and can be used for overhead work.

Cutting threaded rod with a hacksaw？

If you’re using a hacksaw, a good tip is to take a small block of wood and drill a hole through it to place your rod through.

Secure the rod in the vice with two nuts either side using a thin kerf, the rod can then be cut and held in place. Once it is cut, you can unscrew the nuts, which will tidy up the ends and keep the threading in good shape.

Another efficient method is to use a bench vice to hold the rod in place, and an angle grinder to cut the rod. Cut the road at a flat angle and be sure to wait a few minutes before touching the newly cut edge after using an angle grinder as it will be hot.

Conclusion

For more information about wholesale thread rod,wholesale hanger bolt screw,OEM Hex bolt, we are glad to answer for you.